# Field Guide turns a home weather station into a plain-language local display
A homeowner has built a private weather interface called Field Guide to replace the gauges, tables and monthly summaries in a standard WeeWX installation with direct descriptions of current conditions. The site uses observations from a Tempest station outside the house and is available only on the home network or through Tailscale.
The project begins with a practical distinction: regional forecasts and measurements in one yard do not always agree. Its first screen therefore presents the current temperature, an explanation of how it feels and the day’s high and low. In one example, the overnight temperature reached minus 0.6 degrees Celsius while the dew point stayed close to it, signaling likely frost on the car.
Four sections cover wind, precipitation, sky conditions and pressure. Each centers on one prominent measurement, while expandable text explains supporting details in sentences. Unit controls switch between Celsius and Fahrenheit or millimeters and inches, and the page remembers the household’s preference. A traced outline of Washington’s Stuart Range, derived from US Geological Survey elevation data, provides the principal visual element, with illustrated snow, trees and sky.
The interface changes between day and night according to calculated sunset rather than a fixed clock. Its wind compass receives updates from the station hub every three seconds and plots the previous ten minutes, but stops animating when reduced-motion settings are enabled. Other headline values refresh every five minutes, with the open page checking for changes once a minute.
Data quality is treated as part of the display instead of hidden behind it. A measured zero appears as zero, but a missing observation appears as a dash and graph lines break across gaps. Sunrise and sunset are labeled as calculations, not forecasts. The lightning status will not describe quiet skies unless the relevant sensor is reporting.
That approach was tested when a corrected station altitude caused a sudden pressure jump. An early version interpreted the change as rising pressure. Field Guide now marks the discontinuity as calibration, restarts the pressure record and explicitly says the step was not weather. The author also found that roughly one in five minute reports failed to reach the house during a measurement period, leading to restrained warnings rather than repetitive alerts.
Field Guide is a custom presentation layer for the open-source WeeWX software, which receives broadcasts, stores records and draws charts. Home Assistant had previously collected the same station data. The underlying server is a UGREEN iDX6011 Pro.
The system is due to expand with an Ecowitt gateway, additional outdoor and lightning sensors, soil and pool measurements, and a laser snow-depth sensor. Unlike the Tempest hub, the planned Ecowitt gateway will remain on the local network without uploading observations to the internet.



